Makita DCS6401 20 20",64cc Chainsaw 2 Cycle "engine" Questions

Ad

Question about Garden

1 Answer

what type of oil and how much do I use with the honeywell 1000w generator? Engine Oil Recommendations Use 4-stroke oil, or equivalent high detergent, premium quality motor oil certified to meet or ...

Ad

Question about Garden

2 Answers

I have a B&S Lawnmower with a 5.0 158cc engine. 6 months old. Engine began reving up and slowing down while in use last month. Now will start after priming engine but will immediately die. It will

Ad

Engine will start but smokes real bad and only runs for about ten seconds and sputters out . There is also oil coming out of the exhaust pipe back into the engine compartment. If this engine is fitted

fuel requirements for a Stihl 131 Polesaw with the 4mix engine? What fuel do I use in the Stihl 131 polesaw with the 4mix engine? Also so I need any oil in the engine? Thanks Ray hi Ray For your ...

...CW to stops (lightly), then back both out 1-1/2 turns CCW each. This is a basic setting and the engine should start and run. Allow to warm up, then pull the throttle full on--the engine should ...

Question about Husqvarna Garden

1 Answer

...Turn both screws CW to stops (lightly), then back out each CCW 1-1/2 turns. This should allow the engine to start and run. Make sure the fuel filter, air cleaner, and muffler are not plugged. Check ...

...to stops (lightly), then back out each CCW 1-1/2 turns. This is a basic setting that will allow the engine to start and run. Let the engine warm up, then pull the throttle full on--turn H screw CW ...

Question about McCulloch Garden

1 Answer

...stops (lightly), then back out CCW 1-1/2 turns each. This is a basic setting which should allow the engine to start and run. Do so, and allow the engine to warm up. Pull the throttle full on and ...

...stops (lightly), then back each out CCW 1-1/2 turns. This is a basic setting and should allow the engine to start and run. Start the engine and allow to warm up, then pull the throttle full on.

Engine snug to turn. not froze up completely. Overfull oil level. Draining the oil helped. If I fill oil to proper level, should that resolve the issue? Drain the gas, then drain the oil. Now refill ...

Not finding what you are looking for?
Makita DCS6401 20 20",64cc Chainsaw 2 Cycle Logo

93 questions posted

Ask a Question

Usually answered in minutes!

Top Makita Garden Experts

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66949 Answers

 Mikey
Mikey

Level 3 Expert

6904 Answers

Are you a Makita Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...