...mono signal instead of a stereo signal. in this case, just use 1 channel of the mixer, instead of both of the stereo outs, and use a single mono 1/4 inch to mono 1/8 inch adapter. the xlr to 1/4 inch ...
Mono to 1/8 Adapter in the back where it says "Return" but not all the way about half way through. Make sure your cables are plugged in and are no high volumes while you do this because you want to be
...mono) .. noticeable between karaoke songs. Wondering if I should clean it by opening the back or just wear & tear 8 year old .. System works fine otherwise and love the sound. Thanks The small fan or ...
case, there was only a small amount of liquid that had penetrated to the interior. Once I was inside the unit, I was able to remove a PCB and reinstall the buttons in their respective holes. It wasn't
...mono connections. I think either of these solutions are easier than what you asked for. Or is there something else you want to do. Post me back what you need in order to try to suggest you the easier ...
Stereo channels do not collapse to mono. This is my third unit this week which I have exchanged with the same problem namely: which I plug a mono source into the L (mono ) input into one of the stereo
...case for The Allen & Heath ZED-436 is an audio mixer that gives you 32 mono inputs plus 2 dual stereo channels. Which one do you recommend that can fit it well.Please send me email on ...
...MONO VOLUME OUT IS TOO LOW KORG M50 PROBLEMS Might be a case of opening up the M50 as the previous poster did and wiggle connectors and components until the sound is affected. If you have some ...
...mono and the static is still there. i have tried all sorts of gain and eq setting that didnt help. any pointers? Yep ! First thing is to eliminate any processing resource "hogs" that **** respources ...
44 questions posted
Usually answered in minutes!
124 Questions
24 Questions
14 Questions
13 Questions