I need to place all pan pots at 12:30 to 1:00 to get L = R on a mono (l = R) signal into my Mackis Firewire card. I would like L = R to be the normal DETENT in all pan pots. BTW: with all pan pots at ...
...o'clock position. You can "pan" the mic to either L or R speaker or anything between. On the Main/Mon setting, the level sent to the Mon side is controlled ONLY by the Mon level pot for that
...vocal separately. No matter how I hook it up guitar comes thru the vocal channel Hi there. Use the "pan" pots to assign the guitar to left channel and all other pans to right channel. Also, turn all ...
...L&R feeds. Check that the slide switch is up in the MAIN L and MAIN R position. Check that the PAN pots are all
had m mixer unplugged not in use for about 4 days and when I turned it on line 1 phono1 ans mic1 only output through the right channel.. all the rest of the channels are fine any ideas? if it was ...
...as to how the problem can be fixed? only out of warranty by 4 months too. regards Alan Check your pan pots are
I have a gl 2400 how do I hook up one effects unit Auxiliary output sockets (AUX 1-6) would usually be used for connecting to an FX unit input, with the signal levels sent to the FX unit governed by ...
...is set correctly for the stereo usage, that is NOT the bridged OR the Mon mode. MAKE SURE the pan pots are set to middle as they control the spit of the audio to the two channels. This is a ...
I have a VLZ1602 with noise on some channels seemingly on the right side (i.e. panned clockwise). I can hear noise when I push the L-R buttons that assign the channel to the mix, and the same problem ...
215 questions posted
Usually answered in minutes!
108 Questions
85 Questions
69 Questions
32 Questions