Behringer Pmp3000 16 Channel Audio Mixer "output" Questions

On the ZR-76 keyboard, no output on main or aux output jacks ok on headphone On the ZR-76 keyboard, we have no output on the main or aux output jacks. It is normal on the headphone jacks. We need a ...

...Checked with 3 different headphones, and checked pans, no sound on right. Check the Headphone Output: Make sure that the headphone output jack is clean and free of any debris. Sometimes, dirt

marshall mg100hdfx input into output I have a marshall MG100HDFX that I'm trying to fix for a buddy. Apparently he ran another amp's output INTO the speaker output of the MG100. Where is a good place ...

...in korg pa800 Go to www.korgpa.com/pa_root/pdf/pa800/Pa800-200UM-ENG.pdf.Page 226 has the audio output section.Page 19 has the rear panel explanation. Left/Right: These are the main stereo

i have a midas venice 320 mixer, there is no output on the four auxlilary sends, but i have an output on other outputs and headphones. You must have aux sends on each individual channel and each AUX ...

Behringer pmp3000 board powers up sound on A output no sound on output B Output B amplifier has a problem. Most likely the output transistor.

The right output channel on the right side of my pmc 05 pro 4 has very low output. I can hear both right and left output channels in the headphones when I have the cue selected but when I try to ...

Laney GH100L amp...weak/distorted output...Output tube plate voltage is 100V higher than the schematic states...any ideas? That high a voltage MIGHT indicate the output tubes are NOT loading the ...

intermittant LR output problems Main outputs (XLR intermittant LR output problems Main outputs (XLR main l/r out) will lose signal out . still have signal path at subs 1-4 and aux 1-6 Intermittent ...

i have xr 1220 an no sound output?mixer is working but no sound output to the speakers. Hi there, If there's a cue output on the unit, use this to make sure it's actually outputting a signal. Just put