...30 of components when it goes. If the fuse had been replaced after initial failure this results in more damage. For the power supply, typically the two IGBT's are wiped out and the four transistors ...
...30 max for parts to repair the power supply. There usually is about $15 of parts blown on the amp that caused the problem and significant labor to repair the amp portion. If the smoke was dark or ...
...amp ICs. None of the parts required should be expensive. Based upon your description, I would expect a parts cost in the $15-$30 range. Where are you located? Perhaps I can recommend a service shop. ...
...30 and $50 wholesale. The labor is hours of work. I would NOT recommend this unit to be used for electronic drums at high levels. Also read about the hazard regarding use of Speakon to 1/4 inch ...
...amp. A 30 milliohm resistor went up in smoke making a real mess. All three power MOSFETS are gonzo and a zener as well... don't know what else I will find. The previous unit was worse as the power ...
141 questions posted
Usually answered in minutes!
35 Questions
24 Questions
14 Questions
13 Questions