Casio Ctk 496 Electronic Keyboard with 61 Keys and Singalong Capability "taking apart" Questions

...taking it apart frightens you do not start as there is a lot more to taking this model apart compared to a standard keyboard. Also note this link is for the PSR9000 NOT the PSR9000PRO which is a ...

my input is cutting in and out. I took it apart thinking maybe it's a quick solder job but the input is connected to the mother board with 6 legs is there a way i can take it apart and fix it ...

G key not sounding Dead ''G sharp'' key not sounding when pressed. If it is a single key, then the key contact either needs cleaning or there is a crack in the circuit board with the contacts. These ...

RD600 middle A key has no sound Opening the hood to check connections its probably the contact under the key. Recommend taking to a certified service center as taking the unit apart is tricky.

Digital Piano has sticking key I have a yamaha YDP-223 and a key is sticking - how do I take it apart. Typically LOTS of screws... concentrate on those around the edge. USE GREAT care and force ...

...taking apart my guitar? You take apart enough to get to tighten and or replace the jack. For acoustical electronic guitars this OFTEN means destringing and reaching in the sound hole to grab the jack ...

...lots of screws to remove. Be careful unplugging any ribbon cables. The cables are easily damamged by exerting force on just the edges. Have new parts available BEFORE taking it apart for

want to take it apart How do I take apart a Marshall MG10 Practice amp Usually there are screws, sometimes including those holding the handle that support the amp. Sometimes there are a couple from ...

How do I take apart Yamaha PSR-280 keyboard to clean keys. The keys are making a rubbing noise when I press them to play. The notes come out proper, but the noise is getting worse, and I think it ...

...taking it apart. An audio tech could help you out. Chances are it would be a pretty cheap fix. Unfortunately Boss pedals are almost entirely surface mount so replacing a component or two takes more ...