Coleman Powermate Premium Plus 6250W Portable Generator "generator idles fast idle" Questions

...generator idle is to fast if you have an idle control the idle only comes down to about 2000 rpm and thats the screw on the top of the carb that sticks out to the side if you mean full throttle, it's ...

...fast and it wont kick down to idle, with nothing plugged in. Need help asap please thank you They don`t idle. The engine runs at 3600 rpm at all times to provide the neccassary 60hz output frequency. ...

...generator runs too fast, when the idle is activated, slows down a bit, but does not increase on the governor control back to the carby , there is a screw that adjusts the spring tension for the ...

fast as it can. also let idle. it should run on idle as long as you don't turn switch off. if it loads up and quits turn in idle screw until it does idle right . that's about it. also always make sure

how do i clean a clogged fast idle thermo valve NOTHING Use a good cleaner break Kleen in the red can does a good job

...generator backfires when shut down. Might this be plug gap problem? you may be running it to hot or fast try turning down rpms,good luck It's normal. Shut off the gas flow a full ten seconds ...

Idles fine but lacks power at high speed. i installed a new carb. does not seem like it is not opening up full throttle and will back fire if i accelerate the throttle too fast. Try changing the spark

...idles fine will run 1 a/c unit at a time in the past has run 2 a/c units at the same time have removed and cleaned carb no help no restrictions in fuel line and filters are good oil level good Likely ...

...And you don't have to take the engine out to get to the carb. Take the air cleaner off, and examine the carb butterfly. There is a choke fast idle cam that is probably not in the correct

Idle to Fast withoutany hesitation or stumbling. If not - readjust as needed to get aslightly richer mixture. The Genset AC Output Voltage is all factory preset and pre-determinedby the engine MAX RPM