...bobbin thread spool pin. Move the bobbin thread spool pin up as far as possible. 1-Bobbin thread spool pin 4. Place the bobbin on the bobbin winder shaft so that the spring on the shaft fits into the ...
...thread; push bobbin to the left and remove it from bobbin winder pin. 10. Trim thread end from top of bobbin. 11. Press the bobbin winding indent on hand wheel to its original position. If necessary, ...
Question about Sewing Machines
...bobbin thread has no tension... be sure to hold the bobbin spool with right index finger while you guide bobbin thread into slit. You should feel the bobbin thread slide underneath the bobbin case ...
...THREAD THE BOBBIN HOW TO FILL THE BOBBIN Take the thread-end from the thread spool to the left, around the bottom of the "silver" "button"; across the top of the button and back to the right to the ...
...bobbin with thread :( Insert the empty bobbin case onto the bobbin winder in the sewing machine. Step 2 Set the spool of thread onto the thread peg. Use the same thread you want to use on your ...
Question about Sewing Machines
...bobbin thread and now my machine won't pickup the bobbin thread. I've changed spool of thread, bobbin and cleaned but still won't pick up the tread.Brothers model LS-2125 HI Elizabeth. Found this on ...
...Thread the bobbin (put the thread through the hole in the bobbin). Place the bobbin on the spindle with the hole up. Move the bobbin spindle to the right. Hold onto the thread above the bobbin and ...
...thread on the bobbin or let it stop automatically when full. Make sure you dont go so fast that the spool rattles-around on the spool holder otherwise this could spoil the way the bobbin gets
...bobbin, changed the thread, changed the pattern. It sews for about 5 seconds and then breaks. It could be the thread is hanging up and breaking the needle. Check the thread spool for nicks - turn the ...
Question about Bernina Sewing Machines
...bobbin thread color if possible. If it's bobbin thread then it's escaping the bobbin tension spring. If top thread then likely tension too low or uneven feed. This machine has a horizontal spool pin. ...
43 questions posted
Usually answered in minutes!
126 Questions
125 Questions
111 Questions
69 Questions