NetGear WGR614 54 Mbps Wireless Router - Wireless router - EN, Fast EN, 802.11b, 802.11g "not reset" Questions

...not yet resetted. Are you trying to do 30/30/30 reset?? THIS WILL RESET TO FACTORY You have to do this. THere is in the back a reset button. With the router on. NEVER RELEASE THE RESET BUTTON UNTIL ...

...not reset, if that is a brand new Router, then most probably the plastic covering the reset button is still ther you should press it to go in the Router and get to the Reset Button, the pin that you ...

...reset process may not work on some routers and should only be tried if the basic 30 second version does not work. To avoid Internet connectivity complications, disconnect the broadband modem from the ...

...not reset I tried to reset the router following the instructions on the manual and this forum but it refuses to reset. I tried the reset hole for more than 20s and the wlan light does not stop ...

...side. This will accomplish the same as pressing the reset button. Simply unplugging the power cord will not reset the device. Good Luck, J Unplug the power cord, wait 30 seconds, then plug it back

...not reset dir 655. I press the button factory settings but not back to normal. Hello there, You have to make sure that you press and hold the reset button to factory reset for 10 to 15 seconds. This ...

...NOT HAVE A RESET BUTTON on the back. I've gotten replys to use the reset button, but this model does not have one. How can I reset the router? Locate the reset hole on the router. The button will be ...

...please try again: .Problem is like old password is not reset to default or i dont write good default password.Please help... maybe admin/1234 or you did not reset it, hold the reset button ...

...not clear arp cahe Linksys sat my wrt54g is old Perform a 30/30/30 reset; aka Hard Reset. Hard Reset (aka 30/30/30 reset): The following procedure will clear out the NVRAM and set dd-wrt back to ...

...not password-protected. Hardware Reset The reset button is used to reset the system or restore the factory default settings Sometimes resetting the system can return the camera to normal operation If ...