Question about Matsonic Computers & Internet
What power supply connector will work with the ms8137c motherboard (aka, 20 + 4 pin) Ahem, you just posted 20 + 4-pin. That means it can be a 20-pin ATX main power cable, OR a 24-pin ATX main power ...
...power cable)All the pins can be used together, and make an 8-pin PCI Express power cable, for a very powerful graphics card that requires this cable.Just added bonuses with today's modern power ...
...pins 1 9 Power Led + in pin 2 Power Led - in pin 4 Power Button # or + in pin 6 (It's no critic the orientation, it have no polarity, is a push buttom) Power Button GND or - in pin 8 HDD Led + in pin ...
...pins were added to the power supply connector: to handle the high currents needed by increasingly faster CPUs. When the motherboard has these connectors, you need to use them all to get everything ...
...power led white wire goes to pin #4. Now the layout of the pins is the long row (5) pins are the odd number pins 9 being the odd one and 1 is the other end of the row. 2 through 8 start at the pin ...
...pins 1 9 Power Led + in pin 2 Power Led - in pin 4 Power Button # or + in pin 6 (It's no critic the orientation, it have no polarity, is a push buttom) Power Button GND or - in pin 8 HDD Led + in pin ...
...pins is written on the board. the speaker is far from the power switch,the reset pin is by the side of the power pin, the HDD light and the power light are opposite each other.to make things simpler, ...
Question about Compaq Computers & Internet
...P5 and pin 1 is labeled. 17 15 13 11 9 7 5 3 1 . . . . . . . . . . . . . . . . . 18 16 14 12 10 8 6 4 2 Pins 1 and 3 = HD LED Pins 2 and 4 = POWER LED Pins 6 and 8 = POWER SWITCH pin 14 has no ...
...power wire that uses a 3 pin connector instead of a 2 pin connector. It is the 3 pins just past pin 9, and it should be missing the pin in the middle of the 3 pin block. The pin closest to pin 9 is ...
Question about Intel Computers & Internet
power led pins : : : : . They should be color coded red for the switch and green for the power led. From left to right the first pin is for the led (+) lead, the second pin is for the led(-) lead, the
98 questions posted
Usually answered in minutes!
122 Questions
91 Questions
72 Questions
69 Questions
67 Questions