KitchenAid KSRV22FV Side by Side Refrigerator "bolts" Questions

...Set the base grill aside. Attach the 1/2-inch socket to the ratchet. Inspect the arrangement of the bolts located in the area where you removed the base grill. The bolts located to the inside of the ...

The bolt on the bottom of the refrigerator door keeps falling out causing the door to fall off. you need to buy a bolt washer, its a little flat ring that you put in between the revolving bolt and the

...This cover is removed simply by using a thin screw driver and peeling it off. You will find the Bolts under this cover. BE CAREFUL not to over tighten the bolts.. Good ...

HOW DO YOU CHANGE THE DIRECTON THE DOOR SWINGS? Remove bolts that hold both doors, make sure to remember order, bolts for doors should be universal, but hinges need to go in same place just turned ...

...there is that same hole on the bottom of the door There should be a piece usually triangular that bolts to the bottom of the fridge with a post sticking out of the end of it. The door rests on the ...

...door (refrigerator compartment) was sagging, so I adjusted the door position and tightened the 3 bolts at the upper hinge, and in the process, broke one of the bolts! And then -- here's where I ...

The fridge door dropped Probably a loose or lost bolt connected to main body with a pin that supports the door. Usually the fridge has top and bottom pin hinges for adjustment so the bottom one must ...

...I don't see a way to get the cover removed. Any help appreciated. The door handles mount on hex bolts sticking out of the door, the door handles have key hole inserts that match with the bolts. ...

I took two bolts on top of the door'fridge out now how I put its back in the nuts inside I took two bolts on top of the door'fridge out now how I put its back in the nuts inside The nuts ...

...10-15 minutes for sealant to set up .  Carefullyset intake manifold in place and drop in four bolts to align it perfectly.   Put the remaining bolts in and torque in sequence to