RCA L32HD31 32 in. LCD HDTV "control 4 remote reboot" Questions

Control volume UP could be sticking inside the remote itself. Remove batteries and manually turn TV on and see if sound works ok. This sounds like a common problem on these TVs. Try a factory reset: 1

...control problem follow these steps. 1) unplug the TV power cord, count to five and plug it back in. (reboot) 2) try to power on with ORIGINAL MANUFACTURER remote. if that works- your TV and original ...

...control. The up arrow button is located in the middle of the remote, to the left of the "Input" button and below the "Picture" button. Step 3 Press the power button on the TV while still holding down ...

...Control forgot L22W861 You will probably need to try a hardware reset. Try this: 1. Press and hold "Menu" and "Channel+" on the TV. (do not use the remote) 2. Using the other hand, press the Power ...

...control password and i cant watch tv This sounds like a common problem on these TVs. Try a factory reset: 1. Press and hold "Menu" and "Channel+" on the TV. (do not use the remote) 2. Using the other ...

control) 3) Whilst holding, switch the digibox back on at the mains power so the red standby light is displayed 4) Wait approximate. 10-20 seconds for the remaining 3 lights to display, at which point

...4 dots: red, green, yellow, blue. then under that it says' press the Green Next button located on your remote control to proceed. ...I HAVE TRIED 2 DIRFFENT UNIVRSALS REMOTES STILL NOTHING? HELP? The ...

...4. Press any key on the remote to see if the correct mode lights up. (Ex:  if you have cable, the cable button should light up). If it doesn't, press the correct mode's button to regain ...

control the v-chip. The code reset is different depending on the model. Try each number until you find the one that works for you. Hold down the MENU button on the remote and VOLUME DOWN button on the

...control except power button for the tv. when i put the power to stand by, i have to wait for a few minute before it started to red blinks (13 flashes also stop for about 2 seconds and starts blinking ...