Samsung L200 Digital Camera "rod" Questions

FE 170 OLYMPUS digital camera when i turn on the camera the screen would be blank and it immediately goes off and the lences do not go back into the body of the camera The lens need to be replaced or ...

Used FE-170 hardly powering on. I got this used camera from a friend of mine becasue it wasn't working. The camera powers on, But the screen is black. After a few seconds, the camera shuts off. The ...

...4600 battery door i have sourced a replacent for a damaged battery door lid there is a fixed rod in the camera body onto which the lid hinges but i cannot release the rod to slide the lid in - ...

CAMERA WON'T TAKE PICTURES? MY OLYMPUS FE-170 6.0 MEGAPIXEL WILL NOT TAKE A PICTURE. IT WILL TURN ON BUT RIGHT WHEN IT TURNS ON IT TURNS OFF. BUT I CAN VIEW MY PHOTO'S. SO WHEN I AM VIEWING MY ...

...broken battery cover on Konica/Minolta Dimage 7Hi The plastic cover has broken around the steel rod which means the cover won't stay in place. I can't see/tell what to remove to get the rod out

...door came off. I'm not sure if the little plastic hinge piece broke. It seems to be asymmetric: a rod sticks out on one side and forms a pivoting hinge. On the other side there is no rod, and I ...

...you see where the wires go through when you remove the flash top) is not under the activation rod on the pivot, the pivot is not pushed in, or the activation rod is not broken off. The switch ...

shuter dosnot work The shutter release problem is very common in the 7d. The carbon rods in the stabilizing servo fail. I have had quotes of just over $400 from non OEM. I recommend sending it to Sony

When the camera is turned on the lens goes in and out 3 times then "turn the power off and on again". This doesn't work. Do you have suggestions? Thanks Rod thank's

is there a reset on the kodak M320?thank you hi rod...... yes. turn the camera on and go into the menu. scan through the menu until you find the reset function and then reset it. Joe Thanks for ...