...shutter. If they are faulty, the motor will not be enabled for cocking the shutter. Solution: take out the shutter and clean or replace it. It is not impossible, I have done that a couple of times, ...
...shutter is still not opening back up The usual cause of this is a failure of the motor in the SQ unit that drives the mirror up and down, operates the aperture lever, and charges the shutter. This ...
Question about Nikon D Cameras
...enough, it will not drive the shutter opener motor perfectly, and if any type of dirt or friction on the shutter drive gears this will happen, please check the shutter movement by removing the
...motor in the SQ (sequence) unit, which also ***** the shutter, adjusts the aperture, etc. The D40/D40x/D60 all use the same part, so this applies to all three. The motor is only available as part of ...
...motor in the SQ unit on the side of the mirror box. This ***** the shutter, raises the mirror, and operates the aperture unit. They're made in China, motors are **** This is a very very common ...
the correct speed. The reason the mirror is acting up is because the Shutter is going bad under slow shutter speeds. > The motor which drives the shutter charge and the mirror up and down is the same
...I needed to download something from the internet to repair it... butI could not find anything, can anyone help? [email protected] DO YOU SEE SIGN SHOWING SHUTTER RELEASED IT MIGHT BE A MOTOR ...
...motor. You could probably find a replacement shutter unit, but if you aren't comfortable disassembling a digital Nikon camera body then you're more than likely to create more damage while ...
...one nikon d 40 x camera .its showing error.press shutter release button again The camera has a bad shutter or a bad sequence plate motor . If you need help further contact Berrie Smith Camera ...
obstruction on the shutter button motor do shutter
455 questions posted
Usually answered in minutes!
671 Questions
616 Questions
504 Questions
483 Questions
426 Questions