...lens i used. is there a specific workflow that i should follow? thanks Have you done the basic unsharp masking after RAW processing? Normally you'll find a 500% strength, 0.3 pixel and a threshold of ...
lens. I know the mirror flips up for a photo, but to be safe, I have cleaned it, but that didn't help anything. Purchased camera 11/07. You have dust on your sensor. your best bet is to get it cleaned
1. Turn off the camera. 2. Remove the lens, battery, and CF card. 3. Allow the camera to sit without power for approximately 20 minutes. 4. Insert only a fully charged battery, and turn on the camera.
1. Turn off the camera. 2. Clean the lens contacts by gently rubbing them with a pencil eraser or soft cloth. Be careful that you do not let any debris fall into the camera body. 3. Reattach your lens
CF card problem My camera doesn't detect the CF card I put inside it. What can I do? Perform the following procedures if your camera does not detect a CF card. 1. Restart your camera. - Set the camera
lost functions of camera How can I reset to original setting? Setup Screen 3 has an option for "Clear all camera settings" which will reload the defaults. If that's not what you need, you could try re
how do i take picture of the moon just want setting for a moon picture I assume you want a picture of the moon and don't particularly care what the sky looks like.Consider a full moon. Just what ...
...1) The red eye effect is due to pupil dilation. When the person is standing in dark, the pupils dilate to allow more light to enter the eye so that objects are visible. In such conditions if you try ...
...lens to get as much of building as possible, as well as trying to keep the sensor plain (the chip in the camera that captures the photo) as the same plain as the side of the building. This will help ...
28 questions posted
Usually answered in minutes!
429 Questions
440 Questions
331 Questions
311 Questions
191 Questions
