Canon PowerShot SD1100 IS Digital Camera "bent lens dropping" Questions

...bent in lens cover. I could able to take picture also at that instance. But when i tried to turn off, lens could not able to go back to its location. And then onwards it started showing 'Lens ...

Bent lens I have dropped my canon digital camera. The lens will now not retract and it is bent at an angle. When I turn it on it just says "lens error restart camera" Can i fix this myself? From what ...

bent and it says lens error, does it the lens come in and out? if not then it is bent if so then there is a hardware error in the switch and you will have to send it to a profesionall. :) hope i could

lens is bent) and it should slide back in. You obviously want to be gentle enough to not break it, but sometimes you have to use a little bit of force based on the severity of the drop. You also might

camera on, I get the same lens error message and the lens will not extend at all. The lens is obviously bent from the drop. Can this be repaired or is the camera ruined? Try the procedures in this tip

...bent. I get nothing when I turn the camera on except a little A18 in the corner of the display screen Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension ...

...lens bent a little but i managed to put it back in its original form. however when i press the power button the lenses whirrs and tries to open but goes back in and on the screen it says 'lens error ...

...lens was bent and wouldn't shut. I gently twisted it and applied pressure to rectify the lens - but the rim was still a little bashed. The pictures now have very thin horizontal streaks or stripes. ...

...lens errors, but if the camera is out of warranty, or if repair costs close to the value of the camera, they're worth a try. If the lens is noticeably bent, then you may want to try Step 7. Good

...lens was opened, it got bent with the impact of fall. when i tried to switch on the camera it says lens error, restart the camera. also the lens would not go in coz its bent. I live in the UK but ...