...be behind a small cover at the back of the machine. The running issue is carb related any you may be due for a rebuild or decarbonization of the spark arrestor/muffler and/ or engine exhaust
...gas to flow. I am beginning to wonder if the trimmer has been run using fuel not mixed with oil. I am also concerned that maybe I may be damaging the engine using starting fluid. I do not know the ...
...gas. If you can't get it to run continuously, get a small screwdriver and when you get ready to start, turn the high speed adjustment a 1/4th turn to the right. Keep trying that until it either runs ...
...gas mix and dumped out the old fuel and starting with fresh,and a new plug CJ8Y,and as you know the saw has to breath in and out by this i mean a clean air filter,make sure the small screen on the ...
...engine run to rich with fuel. Note: ALWAYS USE COMPRESSED AIR TO CLEAN YOUR JETS AND PASSAGES, VERY IMPORTANT. Note:Before you disassemble the carburetor: Mark each piece with a awl, or some kind of ...
Question about Garden
...gas. I adjusted the idol and it would work fine even wide open untill it would touch grass then shut off again. Half throttle cutting grass is okay. What do I do? I also adjusted the valves. Manuel ...
...engine run to rich with fuel. Note: ALWAYS USE COMPRESSED AIR TO CLEAN YOUR JETS AND PASSAGES, VERY IMPORTANT. Note:Before you disassemble the carburetor: Write down on a piece of paper or take a ...
48 questions posted
Usually answered in minutes!
623 Questions
420 Questions
215 Questions
193 Questions
129 Questions