Makita DCS51018 18" 45cc Chain Saw 2 Cycle "remove chainsaw bar stud" Questions

Ad

Question about Homelite Garden

1 Answer

...remove the bar studs on a typical husqvarna chain saw only had one 20 years ago they were right hand nut side an left hand into block//used the two lock nuts tightened together to pull studs//like ...

Ad

chainsaw body not on stud flange if bar is on stud flange there is a gap so oil leaks out near sprocket and not in bar oil channel I imagine that the oil tube and or drip hole for the chain is plugged

Ad

...muffler, use a punch and drive the broken stud back through the case, it will have a square head on the rear, re fit the new stud, use a spscer and the bar nut to pull the new bolt fully back

Question about Poulan Garden

1 Answer

...chainsaw because the stud for the clutch brake housing has broken loose inside the housing. When turning the clutch brake nut the clutch brake stud just turn with the clutch brake nut. Need to know a ...

Question about Husqvarna Garden

1 Answer

...remove broken bar stud efco mt8200 can't find any information anywhere Broken bar stud ? Is it the bar sprocket at the end ? The Bar itself is easier to replace than to try and replace a sprocket, ...

...remove the chain from a husqvarna 235e chainsaw? Like this or pretty close. **** brake while expanding chain brake binder by pulling brake handle towards left-hand (wrap-around) handle grip, hard, ...

...bar is held in place by 2 studs that screw into the chain saw housing by way of threaded sleeves. Somehow I have managed to strip these sleeves to the point where the studs no longer screw in. remove ...

Question about Echo Garden

1 Answer

how do you remove the stud that hold the chainsaw bar on an echo chain saw, do they just unscrew, and if so is it clockwise or counter clockwise? Unscrew it in a counter clockwise direction.

...bar on broke off, how do I replace them. If it is broken off at the saw, you need to get an ez out to remove it - follow the instructions with it. pretty unusual for both studs to break off at the ...

...remove the snapped stud. Are they screwed in or pressed in? how do I get them out?chainsaw # 316.350220 Any help would be great. Thanks Robert. Go to: www.Searspartsdirect.com and enter the complete ...

Not finding what you are looking for?
Makita DCS51018 18" 45cc Chain Saw 2 Cycle Logo

25 questions posted

Ask a Question

Usually answered in minutes!

Top Makita Garden Experts

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66820 Answers

 Mikey
Mikey

Level 3 Expert

6904 Answers

Are you a Makita Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...