Makita 18V 1/2"CRDLS Drill Kit "drive chuck" Questions

...onto the drive shaft (ie. right hand thread). insert the chuck key into the chuck and tap the chuck key with a hammer so it unscrews in an anti-clock direction to loosen the chuck off the drive

the chuck. to remove the chuck generally takes a special tool.that fits between the drive and the chuck, that keeps the drive from spinning when you unscrew the chuck, this tool varies by manufacturer

the chuck fully and look inside it to locate the screw which has to be removed to slide the chuck off the drive shaft. If you do not see a screw and the drill is not reversible, please come back to me

Cordless Drill, Keyless Chuck stuck in full open position. Black and Decker Cordless Drill, Model # CD140G, Date Stamp 20041952. Keyless chuck is wide open and stuck, won't budge. Any remedies? Thanks

...chuck won't open to put drive bit in. I need to put the drive bit in so I can put an attachment on, but the chuck won't open. Any ideas what I'm doing wrong? Hi Leslie: Give this a try and see what ...

...on my dewalt dwd115 drill likely there is a screw or an allen head fastener inside the chuck that you will need to loosen and then rotate the chuck counter clsockwise to unscrew it from the drive ...

...chuck away from you and hit the allen wrench with a hammer,with the wrench to your right and making the hit drive it downward.Spin it off with your fingers from here,hope this helps. I agree with ...

...drive anvil and bit holder assembly, it does not have a keyless chuck accessory. There are some aftermarket chucks with hex shanks on them to put into impact drivers but I've seen very few that hold ...

...chuck is held onto the drive shaft via screw located inside the chuck. The screw has reverse threads and sometimes the screw gets loose restrictinhg the chuck tightening. Turn the chuck to loosen and ...

...chuck, does it slide off or is it threaded to the drive shaft? 2 How does the clutch ring come off? As I read from someone on this site. After removing the screw, put a large allen key (short end) ...