Hitachi EC12 Portable Electric 2hp Air Compressor, Oil Lubricated "max compressor building pressure" Questions

...when it reaches it"s max. and it doesn"t have the air presure at the tools i"m using at that time and i have the air control max. out. up right air compressor The pressure switch needs to be

...compressor kicks on and builds to max pressure. All air compressors build pressure in the tank(s) to their maximum allowed by the pressure switch. The regulator only controls the pressure of the air ...

air compressor will not build pressure max pressure is 60 pounds and will not go any higher check valves on the head of compressor

...compressor builds pressure then pops off at max, never stops running would best guess that the pressure switch is stuck shut. if the pressure is going over 125psi, "and check with a good gauge" then ...

...max pressure), then this is quite a common symptom of cheap oil-less compressors. From your description you have a cheap oil-less compressor. ACORDING TO THE MANUFACTURES SPECS ON THIS MODEL ...

compressor will maintain 25 psi on the gauge overnight with no bleed down and it does not shut down since it doesn't ever build up enough pressure. Therefore, it runs continuously until I shut it down

...compressor starts up and fills the two tanks. When I connect my hose, the pressure in one tank drops to zero, then goes back up to about 60 psi, then very slowly builds back up to max pressure (130?) ...

...compressor builds pressure, but will not shut off when max pressure is achieved. Pressure switch is NOT the culprit. Most P/C compressors shut off at 150psi. If the pressure switch is bad, the ...

any higher. Continues to run. regulator is set for max line pressure. Compressor has a bad valve. Needs to be replaced. The owners manual should have a break down of the compressor. Order the head kit

...Compressor max, pressure switch cut on, and pressure switch cut off. so i came to this web site for help. where is the help? are we troubleshooting? come on man! what is this? my compressor runs and ...