...screen You need to power drain step1. remove battery and ac adapter for your laptop step2. HoLD POWER BUTTON for 30secs-1mint step3. put back battery and ac adapter step4. power on it sud boot ...
...on but my laptop shows blank screen lights are on but blank black screen be sure no power and all power source is unplug. remove and connect your LCD connector. if not try to change your memory
...screen is blank.It was left on overnight, in the morning wouldn't come on.The hardware power management software (Toshiba's) is set to turn off the monitor after 30 minutes of inactivity.On top of ...
Question about Computers & Internet
...screen turns blank and the power turns pink my toshiba a135 screen turns blank and the power button turns pink. it continues to have power and even plays audio. but i cannot turn the screen on again ...
...power up sounds but the screen continues to stay blank. I tried taking out the battery, letting the battery die then plugging it back in, taking out the hard drive and putting it back in, letting it ...
Question about Gateway Computers & Internet
...screen ramdomly goes blank and computer freezes. Must disconnect all power then reconnect and turn on. Will operate after doing this and may operate for hours before the screen goes blank and the ...
Question about Gateway Computers & Internet
...aspire one notebook power on..battery supply is ok...but i have a black screen...blank screen>...help!!!tnx! FN + F6 Turns the display screen backlight off to save power. Press any key to return ...
screen after I turn on the power. There's nothing appear on LCD. Even I can't see the IBM BIOS. It just black, blank screen. When it's on blank screen state, I enter caps lock key and the caps lock is
Question about Gateway Computers & Internet
...power settings in control panel. It must be set on blank screen after 20 mins or something like that. set it like this turn off hard disk- never blanks screen - never set never with everything ...
...desktop and choose properties. then select the screen saver tab, then clik on the power button, on the power scheme settings, select 'never' on each box then click 'apply' and 'ok' hope this
74 questions posted
Usually answered in minutes!
697 Questions
487 Questions
417 Questions
330 Questions
336 Questions