Sony VAIO NR Notebook VGNNR460ES "ribbon loose service" Questions

...Loose ribbon cable connection? It could be as simple as the connector for the ribbon is loose, but it could also be a bad connection on either end where the connectors are mounted. The last ...

...may be a loose ribbon cable to your model that also may have come disconnected. Contact your laptop manufacturer to see if you can get the unit serviced locally. I hope this helps. Have a good

...loose. anything I need to know about getting case open? Having opened other Sony's I know these can be tricky. Hello, When you say you checked the adapter, I assume you mean you put a meter to it and ...

...cpu workin fine ribbon cable connecting motherboard and display is loosely connected you cant do much with that since it is a laptop, take it to service centre. if u have enough guts u can try ...

ribbon cable is loose, re-insert the ribbon cable into the ribbon cable connector. Keep the ribbon cable square with the connector. do NOT push hard, the cable will stop at the bottom of the connector

...ribbon connection I should have know I would have problems but I have replaced several on Dell Latitudes with out an incident. your only supposed to pull the hinge out carefully a small amount so the ...

...loose connection on the ribbon cable. Chips dont get loose. what is out of place is your lcd ribbon cable. It is a flat cable connected on one side to lcd display, on the other to lcd display. If you ...

...service manual, most likely you can download it from the manufacturer's website. open the laptop and inspect the power jack to see if the solder points have come loose, or if the jack is broken. if ...

...ribbon that I think is loose I have a HP DV1010 laptop and I think the ribbon that connects my base to the LCD screen is out of place as the screen is very dark and nothing seems to fix it. The ...

...loose. Remove and set aside carefully. 16. Remove 4 short screws from top of laptop. Screws are located close to the back of the laptop, under where the screen was. 17. Remove 8 long screws labeled P ...