Mitsubishi MSZ09UN Air Conditioner "turning unit" Questions

Hi, I have a goldStar GA 1866VHR split Airconditioner, (5050w cooling and 5040w heating capacity). Today I noticed that compressor/condenser unit was still running after I turned off the aircond: from

AC condenser will not turn off after unit is turned off. My AC unit will not turn off after the unit is turned off. I can hear the condenser unit still running/humming. The only way the unit can be ...

unit lights then displayed correctly and both operated correctly, cooling. The Mitsubishi units have to be reset by turning off the indoor units by switching the remote or thermostat to off. Then turn

My breaker trips when the outside unit tries to turn on. The inside furnace runs. I cut the inside unit off and the breaker doesn't trip. I manually turn on the outside unit by depressing the cont

...unit not turning on I have a central ac/heat system. Unit will not turn on anymore. I noticed prior to the unit not turning on anymore, the unit was cooling on and off. Would I need a new unit? ...

...turning on by itself with tno lights in the panel . When I turned it off it keeps on running. I liv ein PR and won't need the heat functions. I want to be able to turn the air on/off manually The GE ...

...then remove batteries from controler. press the power button on the controller to remove residual power. turn on the unit then install batteries. turn on controller within 4 minutes of turning on ...

Delux aircon split unit 900btu no display only beeps when power is turned on MAY HAVE BLOWN FUSE OR BURNT WIRE. MAY ALSO NEED NEW POWER BOARD. MAY HAVE A SHORT OR GROUND. TURN THE UNIT OFF AND UNPLUG ...

Turning on heater the AC unit kicks on. When using AC it won't turn off, just runs and runs and runs. Would this be an issue with the thermostat? find where the thermostat bulb is located if it is the

...a copy of the manual from Sears. Electrician was working on electric and was turning the main switch off and on, unit was on and then quit. Check for an inline fuse in the unit or replace the ...