prompt the software to check the status of the printer and the error message should then appear. The following table lists possible causes and what to do to correct the problem. Symptom Possible cause
Close the cover and wait for the Insert Ink Cartridges message to display.Disconnect the power cord from the back of the product and the wall socket, then wait for one minute.Reconnect the power cord.
...Close the cover. If the printer is asking you to do something, please do it. After all the prompts on the printer, please make some test by making a color copy on the printer itself. If you notice ...
cover of this guide.To replace the print cartridges1. Make sure the HP All-in-One is on.Caution If the HP All-in-One is off when you open the print cartridge doorto access the print cartridges, the HP
Question about HP DeskJet Office Equipment & Supplies
...cover is closed! I just "cover open" when the cover is closed! I just bought the printer today, i plugged it in, it powered up and it says the "cover is open" yet its closed... is ...
...close Cover A and repeat the steps above.Remove the toner cartridge, and then close Cover A.Repeat all the steps above until you have removed all four toner cartridges.Reinstall the PCU.Close all the ...
Close the cover and wait for the Insert Ink Cartridges message to display. Disconnect the power cord from the back of the product and wait for one minute. Reconnect the power cord. If the product does
Question about HP DeskJet Office Equipment & Supplies
...prompt to "Change Drum". Don't hit 1 for yes or 2 for no. hit the "Start" button and then put in the number 11. You should see the word "Accepted" in the window. Close front cover and you should be ...
...Close the cover and wait for the Insert Ink Cartridges message to display Disconnect the power cord from the back of the product and wait for one minute Reconnect the power cord. If the product does ...
Question about HP DeskJet Office Equipment & Supplies
Close the cover and wait for the Insert Ink Cartridges message to display. Disconnect the power cord from the back of the product and wait for one minute. Reconnect the power cord. If the product does
117 questions posted
Usually answered in minutes!
2,162 Questions
707 Questions
530 Questions
316 Questions
318 Questions