HP LaserJet P4014n Printer "jam tray2" Questions

...jam exists Check Tay2 paper sensor flag, located at tray2 pick up roller, its its stucked shoot the fault hp laserjet 4015 error code 13.98 paper jams in fuser. REpalced fuser, pick up rollers, ...

...paper. Also it shows a jam in the legal paper tray but there is no jam. change Tray1 and Tray2 Paper size is any size and Paper type is any type as well as check override is on if its off change is ...

...tray2 open. Any suggestions wouold be appreciated a lot!! Sounds like the pick up rollers are worn or dirty. You can try to clean them with alcohol. When you pull the tray out the rollers should be ...

...not pick up the paper from tray2 or print from tray1. It will pull the paper in from tray1, but it jams at the rear of the printer. It sounds like the printer is trying to pick up the paper in

...jam. to sort this you will need: One of these: RM1-0036-020: PAPER PICK-UP ROLLER ***'Y Two of these: RM1-0037-020: PAPER FEED ROLLER ***'Y Hope This Helps Pete unplug the printer, disconnect the ...

Tray2 .... My problem with tray1 only every time I print from tray1 with A5 size I getting the 13.02.00 error code. Recently I have replaced Tray1 Pickup Roller & Tray1 separation pad but I facing

...TRAY2? I CAN'T SEEM TO FIX MY PAPER JAM, HOW DO I REMOVE TRAY 2? Tray 2 should be the one on the bottom and you should be able to put your fingers under the middle section and pull it out. if i don't ...

...tray2 tray 3 put the paper in tray one then try. Thanks Tony PLEASE VOTE ME Instructions Check the display for an error message. If the display reads "Clearing paper from printer," the engine has ...

paper jam in tray 2 but there is no paper jam? Hi, check the pick roller from tray2. try to change the pick rollers tire in the tray. it worked for me many times stefan

we are getting error 13.20.00 jam in tray2 If you finding paper in the back of the printer, the fuser assembly probably needs to be replaced.