Lexmark E 352dn Mono Laser Printer "remove" Questions

...E120 Hi andjam01, Please follow the steps below on how to clean the roller of Lexmark E120. 1. Remove the fill plug from the right side of the cartridge. (Developer roller facing away from you). ...

what do i do when i'v removed a paper jam, now it won't print anything? Hi, You can follow the details instructions on this link on how to properly remove a paper jammed and how to reset the printer ...

...- I don't know if this will solve it (since there could be many causes) but it worked for me. 1 - Remove Paper Tray 2 - look at rubber rollers in printer undercarriage 3 - carefully remove "rubber ...

...Fuser Assembly Removal 1. Tilt the printer carefully to the rear so it is resting on the ASF. 2. Remove the four bottom cover screws. 3. Disconnect J7 (THM) from engine card. 4. Reattach bottom ...

I cleared paper jam, printer won't respond, still have error messages I cleared a paper jam. No fragments left behind, removed a crinkled piece of paper. I removed the paper tray, removed the print ...

what is problam 202 pear jam open rear door remove the power and the usb line to printer remove the cover and look for small bits of paper in the printer after removing the printer connect the power ...

...advance. Our E342n Lexmark printer stops printint 3/4 of a page from the end consistantly since I removed a paper jam. I accessed the back panel as directed and removed the jammed paper and since ...

...quality, but the problem remains. Any ideas? there is an obstruction in the paper path, if you can remove or open up your unit and see for any sign of small piece(s) of paper stucked up, this could ...

...but does not quite make it out of the paper tray. The problem is the pickup paper rollers. If you remove the paper tray and press down on the paper indicator (the red lever to the left of the paper ...

...and after it was cleared the printer started printing a giant black blotch over half the page. I've removed and put the cartridge back in, hit reset, and turned the printer on and off, but it just ...