Question about HP OfficeJet Office Equipment & Supplies
copper-colored contacts of the print cartridges. 7. If you are still experiencing problems with printing, determine which print cartridge is experiencing the problem and replace it. have a nice day. 7
...number, remove the ink cartridge and make sure all the packaging tape has been removed from the copper circuitry strip on the backside of the cartridge. Reinsert the cartridge and try printing ...
Question about HP OfficeJet Office Equipment & Supplies
...print head, re-aligned, still no yellow. All the other colors and black work fine. Any other things to try? Try this : Take out the power cable from the back of the printer keep on tapping the power ...
Question about HP OfficeJet Office Equipment & Supplies
...number, remove the ink cartridge and make sure all the packaging tape has been removed from the copper circuitry strip on the backside of the cartridge. Reinsert the cartridge and try printing ...
...print Magenta even with a brand new HP catridge. try to clean BOTH copper contacts of the printer and cartridge - and try to run again the alignment page..... - if the issue still persist it is a ...
Question about HP OfficeJet Office Equipment & Supplies
...black will not print. It looks like it is printing but no black. Cartridge shows 1/2 full on screen - Does this with both black ink cartridges use Q-tip to clean up the copper contact see what ...
cleaning steps Step 4. CONTACT TO HP SUPPORT Step 1: Remove, inspect, and reseat the problem cartridge and Clean the problem cartridge contacts.. a) Make sure the printer is on. Press the Power button
Question about HP OfficeJet Office Equipment & Supplies
...down on the damp cloth until ink starts to ooze from the cartridge. May require a couple of tries. Try using the cleaning program again. Be careful not to touch the copper contacts on the
print the other lines perfectly. If I go to Best mode it prints the same documents fine also. The Best mode is just way to slow for home office use. In this case what i would request u to do is.......
...number, remove the ink cartridge and make sure all the packaging tape has been removed from the copper circuitry strip on the backside of the cartridge. Reinsert the cartridge and try printing ...
358 questions posted
Usually answered in minutes!
2,817 Questions
1,584 Questions
1,223 Questions
991 Questions
857 Questions
