red light on the camera base. What does the blinking red light mean? Thanks Are you able to move the camera using the remote? If not, then you may have a hardware issue. If yes, then try to connect to
GE Model 2-9450A 4 line phone manual red and green light flashing here is the manual http://www.home-electronics.net/USER.../29450_DOM_EN_CD_IB.pdf
Question about Polycom Lands Phones
...I connect the SoundStation2 through the interface module, on the 2-wire digital port administered as 6416D+. When Power up the SoundStation2 the red LEDs on it are blinking all the time, the ...
Avaya 4690 just flashes red lights and makes a click sound when booting....over and over again Nothing shows on the screen. Was working fine, just moved it from one office to another... now will not ...
...password egistering Base Station on Polycom SoundStation 2W Hold down 1,4 and 9 until green & red lights flash. Then hold down the page on the base station. OR You can register the base station ...
...length of network cables is about 150 metres. Inside the diagnostik I see, that Time Server is red, i.e doesn't work. But IP Network lights green! IP adress is phisical, whithout proxy and ...
...light when booted. Have swapped power supplies and other unit works fine (boots then provides dial tone). On non-functional unit can hear sounds when dialing. Thoughts? Someone in our office recently ...
...just doing it over and over. I tried everything 50 times. Suddenly on the 50th attempt it registered. Tested out fine and all. I cannot explain in any way other than welcome to the IT/Commo world. ...
39 questions posted
Usually answered in minutes!
90 Questions
28 Questions
4 Questions