Hi, we have a Panasonic which has the code THP42G10A and the red light is blinking 14 times, stopping then starting again. Can anyone help? Thanks, Hibsy Don't know about 14 but 13 it would be the A ...
Question about Panasonic VIERA Televison & Video
why is my panasonic tc-p46x3 is blinking 14 times? the tv just shut off and wont come back on. I unplugged it and left it off for 5 minutes then plugged it back and same thing. Red light blinking 14 ...
...replacing it, check the fuse, can be located on this board itself. hi i have a panasonice TH-P50X14A it gives me a 14 flash what can be wrong
Question about Panasonic VIERA Televison & Video
...than unplugging.I replaced A main&P board.To no avail. It powers up and when i hit power button, 14 blinks. I replaced 2 boards and still have the same results. I dont see any components damaged ...
red light blinks 10 times I had the same problem with a Panasonic Viera Plasma TC-P50S3 with 14 flashes. I used an ohm meter tocheck continuity of the boards inside, starting with the power board ...
Question about Panasonic VIERA Televison & Video
...light comes on and nothing else I had the same problem with a Panasonic Viera Plasma TC-P50S3 with 14 flashes. I used an ohm meter tocheckcontinuity of the boards inside, starting with the power ...
...for advice. Hope this helps! I had the same problem with a Panasonic Viera Plasma TC-P50S3 with 14 flashes. I used an ohm meter to check continuity of the boards inside, starting with the power ...
Question about Panasonic VIERA Televison & Video
...lights up Power Ballast Error (abnormal Lamp voltage) - - flashes 3 times every 5 seconds Power Ballast Error (abnormal temperature) - - flashes 4 times every 5 seconds Power Ballast Error (other ...
panasonic troubleshooting 14 red light blinks These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty ...
Question about Panasonic VIERA Televison & Video
...allowed me to turn the power light off and on and when turned on again it started blinking in 14 blink cycles. A little research indicated the a-board or more likely the sc-board. Has anyone ...
271 questions posted
Usually answered in minutes!
457 Questions
346 Questions
268 Questions
236 Questions
213 Questions