Toshiba 26AV500U 26 in. LCD HDTV "tv image red" Questions

static screen is white and red. when watching cable tv all my blacks are red.red out lines around all images on picture. Something wrong with T-Con Board or connector problem between T-con & Main(LVDS

...TV is on, the distance between the image and the ghost decreases. I have a Sony TV model KDL-40BX412. There is a red ghost. Sometimes it is green. The longer the TV is on, the distance between the ...

...Can you help me? WHEN I TURN ON MY TV THE LED IS RED THEN GREEN AND GOES BACK TO RED AND NO IMAGE. WHAT COULD IT BE, i ALSO DID A HARD RESET BY REMOVING THE WIRES AS THE TECH HAD SAID AND

...image behind it. Make sure your contrast isn't set too high. Most ghosting is caused by either contrast, brightness or tint issues. Try adjusting these settings. Also check if there is a Dynamic ...

TV set, the problem is most likely your LVDS(cable from the main board to the t-con)cable is faulty. When you turn the set on, do you have a red screen instead of the standard blue screen? Do you also

...image. Turn tv off, wait till red light stops blinking, and then on the remote press the input button. at the same time press the power button on the tv. this should put you in the service mode. If ...

...image disappears after several seconds - Dim screen - Slow start - Power LED on, but no picture - Unusual colors and/or lines The primary cause of LCD TV and monitor failure is caused by faulty ...

...image Assuming that your TV is a rear-projection TV, then it sounds like the separate red, green & blue tubes aren't set correctly. Each tube needs to be alligned exactly to produce the image on the ...

...image on the screen will start turning red. After about 5 more minutes the images are nearly all black with highlights of red. No capacitor issues here with the power supply board. Caps are rated at ...

...Image and Red Sparklies My TV went "pop" on December 21, called Zenith/LG, and they extended the warranty for 30 days, parts and labor. The repair shop replaced the Y and Z boards and the 2 sustain ...