Samsung LN40A450 LCD TV "standby light working" Questions

standby light is still on but when i try to turn it on the standby light blink way fast then it should and wont turn on samsung ln32a330 The power supply board is dead,that the board,where the power a

...standby light keeps flashing, no display on my samsung TV. Is it the power supply board? or something else CHECK THE CAPACITORS ON POWER BOARD, THERE IS PROBABLY AT LEAST 3 OF THEM THAT ARE SWOLLEN ...

...light is not showing will not turn on using remote control when tv is on standby you can use buttons on side of tv to turn on are batteries in right way to test remote if you have camera on phone ...

...power on but the standby light is still on and responding to the keys... any one can help? im stuck with only local warranty and i've left for a new country... my name is monica david i work in a ...

light up, then you do not enevn has the standby 5vdc working at all. Power supply module will be the first place to look. If you are going to DIY and have proper tools, electronics knowledge, and know

...light at all means the standby 5vdc power supply is not working, without it nothing else will turn on since this 5vdc is needed by the processor to run. Unplug it for about an hour already? Power ...

...standby light would flicker off every 5 seconds or so and the TV would not turn on. The problem was with the power supply board. When the light flickered this way, the standby power read 5.05V on the ...

...standby light stays red but it wont change with remote or by preesing it Tries unplug,replug the tv back like an hour later.The tv,now will reset itself back to the factory setting.The tv should work ...

...light flashing at all time Unplug it for about an hour to see if it will rest itself first, if there is still problem, you will have to open it up and do troubleshooting. Power supply will be the ...

...light you might need a new bulb. Check on ebay for the cheapest prices. that happened to me too.. try to unplug it from the wall for at least 10 minutes to drain all voltages from capacitors that ...