Sharp XR-32X Projector "lamp turn" Questions

...turn lamp 1 ON 28 Lamp 1 shut off unexpectedly 29 Lamp 1 driver overheated 2A Lamp 1 driver operation error (e.g. too hot can?t start) 2C Lamp 1 driver UART communications failure 30 Lamp 2 not ...

Lamp When turned on, lamp comes on dim as usual. What is different now is that after about 30 seconds, the lamp indicator light flashes three times and the turns off and the power/standby light goes ...

lamp About 10 minutes after turning on the projector the lamp turns off and again after couple of minutes turns on and after some seconds turns off . it repeat again and again , and we cant watch ...

...lamp, but after turn it off and then on, i kept working good, after an hour suddenly turned the lamp off but the fans kept working. Now when I try to turn it on, it makes a "click" noise about 2 ...

...3 seconds. The "LAMP RUNTIME" will change to "TIME RESET [POWER OFF]". Turn off the power and disconnect the power cord. This will reset the cumulative usage time for the lamp unit to

turn the projector ON. The 'replace lamp' light is not ON so I dont know if the problem is the lamp or the projector. try removing the lamp, usually quite easy, you need to find the door for the lamp.

...turn on after I replaced the lamp I have a Panasonic PT-LB50U that will not power on after I replaced the lamp. I've check cables and all- If I turn on, it looks like it's going through the cycle but ...

lamp 1 light is on upon turning power on. Then lamp 2 light turns from green to red it might be a bad lamp. i'd recommend reversing the 2 lamps, and if the problem follows, then you know you have ...

...lamp turn on and about 30seconds it turn off by itself and then the lamp and temp lights come on and stay on. It does not do anything. You need to replace the lamp and then go into the settings menu ...