Acer X1160 DLP Data Projector, 2,000 ANSI, 2,000:1 Contrast Native SVGA - 800 x 600 res Projector "dust" Questions

... Red LCD=cyan(baby blue) onscreen, and Blue LCD=yellow onscreen. These spots (specks?) are probably dust particles that get past the filter. Annoying but harmless. To check if they are indeed dust ...

...most likely the main board(green channel). If the focusing removes the purple(you have *that* much dust in the unit?) then it *is* dust. You should be able to focus on the dust particles twice--dust ...

projector picture flickering i have dusted and dusted the inside and the bulb what else can i so to stop the flickering Dusting is not going to help. I could be the lamp if it happens with no input ...

panasonic projector dust filter warning dust filter door you need to clean dust filter and replace filter if required it depends on which model u are referring to this message is seen generally in the

...project to the screen, we are getting spots on the screen - mostly noticeable in dark. We blew for dust and still no change check if the spots are pixel size dots and not dust. if so then the

i have what looks like particals of dust on the screen that is worst at certain focal points can i cure this ! thanks blow the dust out with canned air. if you can focus on the dust, chances are it's ...

there is dust inside the lens. how do I clean the dust from inside the lens? Your projector needs little maintenance. The only thing you need to do on a regular basis is to keep the lens clean. Never ...

Red specks on screen always in the same spot It acts as though the lens has dust on it but it is clean. I think it has dust on the backside of the lens. Is there any way to clean or blow that dust out

...is noisy Quite possibly getting past it's used by date. The other thing to check for is the deaded dust. If the fan is covered in dust, it will not cut cleanly through the air and make noise. Do not ...

i need a service manual for infocus 2100 series there's dust inside that made the unit not work since. i blew out the dust with air and now it works properly, but there's still dust indise the optics.