Tech Solution TS-8000 Cross-Cut Shredder "fellows paper stopped working" Questions

...stopped working I have a Fellowes Powershred PS 60CC about 2 weeks ago it started turning slow when 3 pieces of paper were entered, before it would eat through 5-6 pieces of paper with no problem at ...

paper towel or long q-tip. If this does not fix it, then the sensors will have to be replaced. Most Fellowes machines have a 3-year warranty, you can call Fellowes at 1-800-955-0959 to see if yours is

fellowes ps77cs cross shredder doesn't auto stop fellowes ps77cs cross shredder works fine but doesn't auto stop when no paper is being processed. It is touch sensitive and stops if you touch the ...

...then stops. Shear pins in place all gears working, lights on. Any suggestions? Thanks Ken seems to be an issue with the paper feed sensors i suggest you call Fellowes customer service. ...

...paper lint' . blow out the sensors and the shredder will turn off It worked!!! Now my Fellowes DM8C is working like a brand new shredder. At first, I cleaned the sensors several times and it did not ...

...switch located in the middle of the feed slot before the two rows of teeth. Sometimes a bit of paper can get jammed and stop the unit from working. Unplug and remove paper with tweezers if

...FELLOWS GD1200 SHREDDER IS REALLY JAMMED WITH PAPER.WENT TH SHRED ENVELOPES AND TOO MUCH PAPER WAS INSIDE.hOW DO I UNJAM THIS? iVE TRIED REVERSE SLOWLY THEN FORWARD,ETC.IT IS STUCK BADLY.I SAW AN ...

paper shredder started to make this noise where it sounds like a jack hammer. Then it stopped working. We unplugged it and then an hour later plugged it back in. It started working but is still making

...not shredding the jaw accepting paper seems to be too sensitive and stops working too often Make sure the cutting rollers are oiled frequently. replaced the main board and the eye sensor if

How do I stop shredder from spitting documents in and out? When placing paper in shredder it take it in and then backs it out continuously before completing. Try cleaning the cutters well. This will ...