Question about Sony Audio Players & Recorders
...stereo same thing. Also took receiver apart and vacuumed dust balls. Maybe, it worked for me. my rear speakers workt ramdomly, often not. so i re solder the relay for the rear speakers, now it works ...
Question about Aiwa Audio Players & Recorders
clicking noise and it turns off and loses power. This is an overload protection feature. Check for speaker wires shorted to ground or a blown component. This unit is in protect mode. This means that a
clicking" noise within the unit. I opened up unit, unable to pinpoint source of clicking. This sympton happens regardless of source (CD, tuner). The clicking is the sound of a bad relay. A relay is an
...700 rack system, you had to plug the tuner into the wall and then plug the amp into the tunner if you didnt , when you turn the amp on you just get a relay clicking noise and nothing turned
...stereo to shut off... So check the wires. read the manual good Have not quite figured this one out ,but found that if you hold the Power/Standby button while holding the Input next and Multi Channel ...
...noise(click) would repeat over and over again for about 15 seconds and the blue light(everything that is normally visable) is not showing anything.Now the clicking has stopped other than when i turn ...
Question about Onkyo Audio Players & Recorders
...clicking sound when using surround settings. These receivers also have a Dolby Digital input issue that can cause audio dropouts when watching cable or SAT broadcasts that encode DD using a 'newer' ...
Question about Yamaha Audio Players & Recorders
...stereo as soon as i turned it on it only stayed on about 2 seconds then shut down. i am able to try three times with same results before i have to unplug it from ups then wait 30 seconds and can try ...
Question about Yamaha Audio Players & Recorders
...stereo as soon as i turned it on it only stayed on about 2 seconds then shut down. i am able to try three times with same results before i have to unplug it from ups then wait 30 seconds and can try ...
Question about Kenwood Audio Players & Recorders
...clicking noise ( like when a 5 stereo cd change cd ) then it stays on standby i unpluged everything an replug everything.can you tell me if its an inter nal problem or me whos dumb my email is: ...
237 questions posted
Usually answered in minutes!
173 Questions
140 Questions
146 Questions
92 Questions
89 Questions