Yamaha RX-V463 Receiver "rca surround system manual" Questions

...surround sound system to an analog tv? The tv only has the three RCA jacks for audio and video. the RX-V463 has many jacks, and the manual is no help. the manual does show the connections needed, but ...

...surround system's receiver set to the correct input. Next, check the audio level. On some sources for the TV, I need the volume at 65. Other sources sound fine with the receiver at 45. Check that the ...

...Surround speaker work when using the receiver sound level test; only the front, center and sub work. I have changed all Listening modes, since manual states rears will not work in Stereo and Mono, ...

...surround sound room system while the earphone is on for a hearing impaired person. Is this possible with this unit? http://www.retrevo.com/support/Yamaha-RX-V365-Receivers-manual/id/23270ag802/t/2/ I ...

RCA cable. You might have that buttons on the remote for surround,2channel,3channel or 5.1 channel. orGo to the DVD's setup menu and click on "Audio Setup" or on "Languages" if there is no Audio Setup

...surround system Must be an HDMI ? If yes use the HDMI DVD input on your receiver ( from the Blue Ray using a HDMI cable ) Then use an HDMI cable from receiver to TV. That should work for image. Sound ...

Surround capability in this stereo, only straight Left and Right on system A, system B or both. Using this stereo and speaker system will probably sound better than the speakers inside your TV however

surround mode.Next, connect the TV.Use an RCA cable to go from an "Audio out" jack on the TV to an input jack on the Teac -e.g. "Aux, TV, etc.If your TV doesn't have the proper jack, I'm afraid you're

...RCA Home Theater System RTD 3136 Trying to setup the speakers and we don't know which one goes where. The speaker jacks are labeled on the surround system. front left front right sub woofer (can be ...

surround sound system's auxiliary inputs. However most televisions do not have outputs. If your television fortunately has one, then you'd proceed to connect either the red and white RCA audio