Yamaha RX-V463 Receiver "rca surround sound speakers started" Questions

...surround sound speakers make sure that u run everthing threw aux what ever you have your speakers connected to u have to look in the back of the of the conection and connect your rca jacks to the aux ...

...surround sound system to an analog tv? The tv only has the three RCA jacks for audio and video. the RX-V463 has many jacks, and the manual is no help. the manual does show the connections needed, but ...

...surround You can hook as many subs as you like since the Onkyo only provides the Pre-Out Line Level to the amp(s) that drive it (them). I run two myself. Bi-wiring is a personal choice and some swear ...

...surround sound.  The front three speakers and subwoofer would always work.  But somtimes either both or just one of the rear speakers wouldn't work.  Obviously when I would turn it ...

...RCA cable connections on it. Culprits could be a variety of things here is a short list 1. make sure the input is set to analog not digital this is done through the menu. 2. make sure the speaker ...

surround speakers for this old receiver. First time using an active sub. Worked great. For 7 days at least. Suddenly in the middle of a film, the subwoofer started a low frequent humming noise, at the

...surround mode you can hook up a single rca cable to the orange connector on back of dvd player ( marked maybe as " DIGITAL PCM/LPCM " or simply " COAXIAL"the other end goes into the same connector on ...

...Surround mode, and DSP mode used to work perfectly with any component selected on the front control panel IE; Tape, VCR I, VCR II, CD,Video, TV/DBS, DVD etc. Also I have been running all components ...

...RCA analog cables, and put your surround receiver in simulate modes 2) hit pause and then play for a split second on your dvr, and watch the "Live" HD channel slightly in lag 3) get some sort of ...