Yamaha RX-V363 Receiver "rear sub working" Questions

...sub and then connect your rear speakers to the speaker level output on the sub to power them. This is an active sub woofer but for some reason they made it connect as if it was passive. I am not sure ...

...rear of the unit. Press Ext. Decoder and see what comes out of the Sub output. This bypasses all DSP and could prove if the Sub Out really does work. Does it not work in speaker level setup either? ...

rear surronds and now the sub woofer wont work. I have the speakers set up as per manual and still nothing. Rear Surrounds are not supported on this unit, they would be the 6th and 7th channels in a 7

...how the video is formatted. The RX-V363 has a special Sub-Woofer RCA jack located within the middle of the rear panel - look for the white rectangle area going from the top to halfway down the

...It's to drive an amp that drives a sub. Besides, it's a car speaker and needs an enclosure to separate the forward sound pressure from the rear sound pressure or it will partially cancel itself

can n ot get rear surrround speakers to work This is properly wired in the rear but we can not get rear surround speakers to come on.also how do I get to 7.5 surround? On this reciever you have rear ...

...rear speakers are plugged into zone 1 per instructions. The sub according to instructions is plugged into zone 2. Why is this? Why do I have to have both zones on to hear the sub - or is this how tx ...

...sub is working .Power it up , remove sub RCA jacks from receiver .Gently tap on RCA with fingers.You should here a hum when touched .You can also try audio from TAPE REC OUT .If you dont get audio ...

...rear,2 front,& the subwoofer. The sub is a psw-250 with no sub out or LFE.I can't figure out what i've done wrong,cause the way i have wired it,it don't work. Here's the way I did it.I used a ...

...rear subs&amps) please confirm from two things1-cable between sub and receiver is working fine2-setup of speaker make subwoofer in on status.-if the previous are ok you will have a problem in sub ...