Onkyo TX-SR606 Receiver "auto detect digital input" Questions

...auto mode) In this mode, the types of signals being input to the digital and analog input jacks for the selected input source are detected and the program in the AVR-3300?s surround decoder is ...

...Digital audio is only through optical hookup. Then hook your mic up and run the YPAO and set to auto to run the sound basic set up then when done, go back a fiddle with the manual set up and turn up ...

...auto detecting, when I start a dts movie, the receiver does not recognize it as a a dts signal. could you please advise what the problem could be? thanks a lot What DOES it detect instead - analog or ...

auto detects the digital audio signal and sets the receiver's DSP to decode the signal correctly. You can go into the OSD menu to bypass the auto detection of it, but it's not recommended at all ! You

...Digital" or "Auto" (automatically switches to digital when it detects a signal) modes. Also, setting it to "Direct" (2-channel from an analog source) could result in loss of center channel. Or your ...

...auto detect, manual and nothing works. I have also had it to the shop twice and it works fine there. Also after being on a while it starts to pop, click and make some weird digital jumble noise. ...

...DIGITAL LEAD FROM DVD 2 AMP ,SET AUDIO OUT ON DVD 2 BITSTREAM THEN AMP WILL DECODE DOLBY DIG AND DTS "6 ICONS ON AMP". HOOK UP DVR WIYH PHONO CABLES AND SET DECODE MODE 2 PROLOGIC2 2 GET SURROUND ...

auto setup ser#N 038744 any help would be appriatated! steve the unit requires original remote for all its functions to work properly.as with other same type of remote the unit is detecting the remote

...to 'auto'. the radio may be stuttering because the receiver is changing from different audio modes such as 'dolby digital' to '5ch stereo' (for example) when it detects a change in the radio ...

...AUTO mode when you input a digital signal or analogue signal, the set will detect it automatically. check whether MUTE finction is ON. If it is ON, turn it to OFF. Check the speaker select function. ...