EON JBL EON10 G2 Main / Stereo Speaker "speaker fuse" Questions

speaker fuse fuse keeps blowing on one speaker,just started today.Can I use bigger fuse or is it the speaker thats messed up?Only about a yr old Most likely there is something wrong with your speaker.

fuse inside. The speaker cone appears to be in perfect condition, but no sound is being produced. Yes, I hooked up the other speaker to the same channel, and the other speaker works find. Many thanks.

...speaker fuse? Speaker fuses are rated in Amps. If you cant find the specs on your speaker via google, (I couldn't find anything on the fuse.) start with a 2 Amp 'slow-blow' fuse. That should work at ...

fuse..Those type of speakers do need a good supply of power to run and speaker wire size could play an important part of that.If wire supply is to small it will over heat the coil in speakers and also

...speaker unit by unscrewing the back. The fuses are located near the on/off switch assembly. Replace them and screw the the unit back together. To avoid blown fuses, try lowering the volume. try jbl. ...

...speaker wires are not touching each other. i dont think it would be a fuse because that would cut the sound completely.you could open the unit to check for a fuse or fuses. if none of the above ...

...speaker and it worked fine. I found out the businesses cash register quit working at the same time our speakers gave out. Do you know if there is a fuse? Something? Thanks, Rhonda depends who ...

...fuse or is it the speaker?About a yr old rarely used until the last few mo The speaker doesn't sound blown or destorted but keeps blowing fuses when cranked up ANyone know anything? Try ...

...speaker fuse) OR (if you're blowing receiver/amp fuses) too many speakers wired in parallel showing your receiver/amp far less than the 8 ohms or even 4 ohms impedance that it is rated for. For ...

...speaker to see if there is a fuse holder, if not, it may be internal and if there is a panel you can take off, do that and look inside for a fuse and check it with a volt/ohm meter if its blown ...