Question about Dell Office Equipment & Supplies
...of the paper tray rest against the edges of the paper. 4).puhs in the paper entender, lower the tray cover. 5). entend the paper exit tray stop on top of the paper tray tocatch the paper as it
paper) instead of 2 (A3)? Thanks. push"special function" button, then select "key op prg", then "ok", then enter pin (default is 00000), then select "fax", then "ok", then select "rcv function", then
paper in tray light on all time no paper in tray light on and will not print. the small lever that sences the paper leval has been checked and the cell cleaned. new cartridges have been fitted and the
Question about Ricoh Office Equipment & Supplies
paper in Tray 1 or bypass - tried to rest tray 1 and turn on/off, but the display still shows that there is no paper. What else can I try? There is a paper detect sensor which sits in the frame of the
...paper in the multi-purpose or pull down tray 1 assembly. Thanx also for the FixYa. Just the information that "Custom in MP" meant the multi-purpose or pull down tray(which i had never used or even ...
Question about Ricoh Office Equipment & Supplies
...rest of the pages from tray 3, which contains blank paper. That seems simple enough, but I cannot get it to work. If I choose to print only the first page on tray 2 and everything else on tray 3, ...
paper is printed & rest 25% is left blank . Hi, did you place paper in tray also horizontal? the paper in tray and on glass must be horizontal if you want to copy A4R size. DO NOT forget to adjust
...rest next to the paper in the loading tray, you are required to push these so that they slide over and rest directly next to the stack of paper. This will guide the paper into the printer straight so ...
and on the control panel or key panel , press the paper key and hold until it blinks while the rest is off, use the paper select key to adjust to A3 and press print key, then press the paper key again
...paper guides to rest gently against the left, right, and bottom edges of the photo paper. Insert the tray. Make sure the correct print setting is configured before printing your file. With your file ...
85 questions posted
Usually answered in minutes!
629 Questions
382 Questions
267 Questions
215 Questions
218 Questions