...the symptom. The toner level sensor has an open-circuit, replace the toner sensor. Toner Sensor FK2-0358 comment savoir que le detecteur (TS) FK2-0358 est en court ...
...prints with a blank section through the middle of the page, why would it do this The scanner bar (FK2-1377-000 contact image sensor) may be defective. This part is located under the glass, so it
...motor. Replace the DC controller PCB. Replace the power supply PCB. M201 - Fixing Drive Motor - FK2-1067 - J202 on the DC controller PCB - E007, E808 Power Supply - FK2-1074 re assemble the
error E225 image class mf4320d imageCLASS MF4320d with error code E225 is the CONTACT IMAGE SENSOR UNIT need to replace. Part Number is FK2-2869-000
Question about Canon Office Equipment & Supplies
...u can, if that does not help you will probably need to replace toner sensor itself. (Toner Sensor
...of a scanned document? The scanner reader is probably bad. Canon calls it a Contact Image Sensor FK2-1377-00 This is moderately hard to install because it is under the glass.
error code E000025-0001 This is a toner feed motor ( FK2-0015-000 ) error. This the bigger motor of the toner hopper assembly. This is not that difficult to replace. If I remember correctly you just ...
...is integral with the ccd so you will need a new contact image sensor. The part number of which is FK2-2869-000. A canon supplier should be able to get you one and its not difficult to fit
.../ New PN: FM3-4436-000) may be necessary. If symptom persists, replace the DF-RD26 Shield Cable
...Pse help because it does not work now. Try cleaning or replacing photo-interrupter ps23, part #FK2-0149. It is located in the ITB positioning assy. which engages and disengages the cleaning
751 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions