Minolta C250 Color Copier "belt assemble image" Questions

...message occurs because the printer cannot detect imaging unit motion, up-and-down. The Transfer Belt drives this motion, and the Drum Contact Assembly detects it. 1. Swap the Imaging Unit Cotact ...

...image. The transfer belt assembly is user replaceable and looks just like a big toner cartridge. You can get them from Office Depot or Amazon.com as well as almost any place you can get the toner for ...

...belt edge sensor to read. Is the sensor window covered with toner? If I'm not mistaken you can move the image units between the Cyan, Magenta and Yellow I you have a service contract you can get ...

...TO CLEAN THE IMAGE BELT IN A XEROX DOCUCOR 50 take out the belt assembly and remove the cleaner blade assembly. You can then use a damp cloth to wipe it clean if you dont have any xerox cleaning ...

...Belt - it did not correct the problem. Seems its fuser assembly fault. Fuser assembly is a part to fix toner image permenentely with the help of hot rollers on media. The temparature varie depends on ...

...image is repeated 1mm to the left). I just printed 3 pages, 1st two were perfect, 3rd one with defects. So then I printed 6 pages: 1, 2, 4 & 5 are perfect, but 3 & 6 are not. I am very perplexed (and ...

on the printer, it sounded like paper was jammed in the printer, only to find out that the transfer belt was wrapped around the transfer belt assembly unit (?) Does that sound right? Anyway, we have 3

I just replaced the Belt Cleaner Assembly in our Xerox Phaser 7800 as it was stating it was at 0% and PAST end of life. Now I have installed a new one, the same message is still up! Help! When ...

...image is printed. Check wether the transfer belt cleaning unit inside the photoconductor unit have wrong cleaning cycle due to the defective cleaning clutch. This problem could be a couple of things. ...

...the imaging unit seems to have ripped in one place. Is this fixable please? It is the transfer belt. I don't think there is a supplier of just the belt itself. You must replace the transfer belt ...