Vulcan AUW230A Heater "working" Questions

...all parts possible have 2 reddy heaters 55000 one works other will not I switched all parts from working to non working heater including fuel still will not work what else can I do Cannot answer ...

I've had an Electralog heater 120 VAC for about 5 years, and it has worked fine, but all the sudden the heat won't work. The fan works, the flame works, just not the heat. Any thoughts? Model

I have a HeatDish plus footlight. Worked fine for a while. Light went out, but the buzzer still worked when it was tipped so no big deal. Then it quit. I have taken it apart and note the contacts are ...

...is on. As the winter is coming, I think this heater needs a full service to make sure a safe model working for the coming winter. your fan controll thermostat in the heater is not working it needs

i have a heatpump wired as in diagram fan works a/c works but not heat what do i do?honeywell CT87N On the sub base jumper R to RC this will allow it to work in heat.Just Run a wire from r over to rc ...

I have a Charmglow electric fireplace that does not heat nor does the blower work. The flame light does turn on and turns. Model # 6901050100 Cat # 409896 It worked then quit. tore it apart, it wo We ...

just stopped working worked and now it doesn't. light does not go on- and does not produce heat. does it have a overheat setting that could have tripped a fuse inside the unit? notice on side says not

...on auto and burner turned off after 3 to 4 minutes. Sounds like the automatic fan control is not working afc you can take this out it can get cloged with dust on the back of it clean it and see if ...

Why wont my IXL TASTIC WORK? This turns on with the light although nothing works. what part of it doesnt work the heat lamps around the outside or the light in the middle? does the fan work?