Williams 1403622 Gas Compact Heater "pilot light supply tube" Questions

light The knob on valve will push down no gas goes to the thermocupler Are you getting gas to gas valve? if so then pull supply gas line off the gas valve and look in the end of the gas valve there is

...well. Again turn on the gas supply, spray or rub some soapy water on the fitting you tightened, depress the knob and hold it. The soap will bubble up if there is a leak. Fix it. Now light the

...pilot light, end split, thin gas tube that goes from where you turn on the pilot light switch to the actual pilot,on the end where the brass nut screws on to the fittings, also need a thermocouple ...

...pilot light will come on when i set the dial to "pilot". However when i turn it "high" the pilot light will go off. Any ideas? the pilot light is operated off a millivolt generator. that is the small ...

...lights. Try to position them so they are equal distance from existing pilot.You can buy pilot light assemblies,pilot light tubing,andfitting at most H.V.A.C. supply centers. Hope this helps you. ...

...pilot light lights, when the pilot lights you will need to hold that button down for about 15 seconds. then when you release the button the pilot should stay lit. when it does... turn the button to ...

...pilot light, measuring temperature and suchforth. Anyway, they go bad and the pilot won't stay lit. Make sure you get the right length (bring it in with you -- normally it's 18" but could be longer). ...

pilot light does not always light Hello You may have a bad thermocouple if you have a standing pilot light. A standing pilot light is always lit,the thermocouple feels the heat and opens the gas valve

light Pilot light works fine but regardless of how long I hold down the light pilot light button, when I try and move the control to ON, the pilot light decreases then goes out and the heater does not

...pilot light is out or something The heater will kick on, but no heat... I had the gas shut off a few months back, so I think i maight need to ignite the pilot light like I did the water heater... How ...