Williams 1403622 Gas Compact Heater "old wall pilot light" Questions

...wall. Is it safe to relight the pilot with a match ? if the stove or fireplace doesn't have electronic ignition then yes its looking for a pilot lite I used to have a old water heater that did this , ...

wall heater approximately 20 years old. I had a repairman replace the generator and pilot assemby. It worked for one night and now will not ignite again and the pilot light is light Bad gas valve most

...and small particles that accumulate in the pilot barrel. Use several burst being that it is 2 years old and has not been blown out. THe manual references cleaning the pilot in the maintenance

...wall heater won't lite. Hi, We have an old model Rinnai gas heater which is mounted in the wall. There is no model name or number on it but it appears fairly old. It has an ignition button, a button ...

...wall heater 2509622. How do I keep the pilot on? It tends to turn off after it reaches the desired temperature. In CA. Natural gas. About 15 years old. Turned on for winter. Generally turns off after ...

...t get pilot to light? my procom ventless wall heater is less than 1 year old and i can't light pilot. tried steps in owners manual as well? Use your warranty and contact service provider. usaprocom ...

...old. The model #GC400050-08M. The blower works and the pilot light is on, but no heat is coming out of vent. The flames under pilot light will not come on. Any suggestions. Tie red and white wires ...

...wall furnace 5009622 the pilot light will not stay on Hi, The thermocouple is bad and needs to be replaced... The thermocouple is the copper rod that sticks up into the pilot flame and then screws ...

old or so. Move the gas valve knob to the PILOT position and press down on the knob. You will be pressing down on a spring loaded safety magnet. Now light the pilot and keep holding down the knob till

...wall? I've left it connected to the first screw, ran the heater. But, it never turns off? Any suggestions? Thanks Is this an old heater? If so the burner may be in bad shape so when the thing turns ...