Empire ECS HB06M HearthRite Heater "gas blue flame keeps" Questions

...blue flame heater last night, worked perfectly. This morning the flames and pilot light are burning mostly orange. What could be causing this. That is a bad air/fuel mix... could be anything like ...

...blue flame gas vent free wall heater that does not stay on I belive its the o2 sensor can i replace it? You probably have soot in the gas orifice causing low pressure flame that does not keep the ...

...gas is coming out. What do I do? its turned on. you need to change the thermocouple, that's the little rod that the flame sets on when lit. it needs to produce 18-30 volts dc to hold pilot valve open ...

...blue flame which is the key indicator of how the heater operates...remember when you start to see an orange flame that should raise a flag that you need to clean out where the flame ignites and the ...

...flame. When it heats up, the gas flows. If that is shot, then it won't keep the gas flowing, so it will turn off when you let go of the button. Try tapping it lightly with the tip of a screwdriver to ...

...light area to tha gas valve. It feels the heat from the pilot and keeps the gas valve open for gas to flow to the pilot or to the logs when in the lit position. Without the gas valve will stay

...gas off) where the pilot flame usually burns. Then examine the tip of the thermocouple and see if it is still round and smooth. Jagged or irregular tips mean it should be replaced. A blue pilot flame ...

...blue with a small yellow tip, and it should cover the thermocouple (a small rod in front of the pilot light). If the flame is too small and doesn't cover the thermocouple, it may be adjusted too low, ...

...gas appliances have a constant on pilot light.This keeps you from having to light it everytime it goes on. The pilot flame is small, and usually mostly blue in color. If there is any yellow or orange ...

...Blue Flame Natural Gas 30,000 BTU Stove Smokes the wall above it all the way to the ceiling and keeps the wall very hot, this is the second one we have tried, has anyone else had this problem? It ...