...Gas knob for gas, then crank the Igniter button. This summer, we started having problems, sometimes needed to push & turn the Gas knob a few times before the gas would actually flow (it is easy to ...
Lighting access hole Where is the access hole for lighting Top of the pit lol get you a long lighter turn the knob to a small gas leak stick the lighter in the grill and light very easy
Without turning the gas on at the tank, turn the knob to light, and see if you get any flame. If all of that checks out, It is probably the gas regulator. They are relatively cheap and easy to replace
...knob is in the ignite position, the gas should be coming out of the burners at a rate sufficient enough to light. It's normal to smell it before the igniter (either electric or push-button) ignites ...
...knob back onto the tank (all the way and make sure it's tight). Then S L O W L Y turn the gas back on. Now try your pit. If you get the same flame, it's the regulator. If you get full flame, you just ...
...gas tank valve OFF and disconnect the hose from the tank. 2. Wait 5 minutes and reconnect the hose to the tank. 3. Open the tank valve VERY, VERY SLOWLY (Slow motion, slow). 4. Once the tank valve is ...
15 questions posted
Usually answered in minutes!
65 Questions
43 Questions
31 Questions
38 Questions