Question about Siemens Dryers
...Turn the dial to off. Then you need to press and hold the start button and the low heat button. Keep them both held in and turn the dial 1 click clockwise. Keep the buttons held in till start light ...
Turn the dial to off. Turn the dial clockwise to the 6 o'clock position. Press the start button 3 times Turn the dial 1 position clockwise. Press the start button 3 times. . This should erase the code
Maytag Dryer Cycle not Turning My maytag dryer's cycle is not turning. There is heat but the cycle is not turning. if ther is heat, and the drum is spinning, the dial/control mechanism is faulty
...turn the dial to the 6 oclock position. Press the start button 3 times Turn the dial 1 position clockwise Press start button again 3 times Then turn to off and this should clear the error code.if you ...
...turn on when the power button is pushed. but i noticed the heavy duty light on the dial stays on unless I unplug the machine. we have already replaced the control board and had a technician out that ...
...Turn the dial to Normal. Press and hold the Select and Pause/Cancel keys for 6 seconds, or until the Drying/Cool Down/Press Saver/Clean Lint Filter lights come on. Then press the Start and ...
...turn the dial to off. Press and hold the start pause and the nearest option button. While you're holding them down, turn the dial one notch clockwise. The machine will beep or flash, let go of the ...
...dries but doesn't turn off Check for bad motor timer. Attached to dial control. Test by turning dial to timed position without starting dryer. Dial should return to off. Timer is available
Question about GE Dryers
...turn the dial) the selection dial stops working frequently you need a new timer....it is actually a plastic disc that goes under the outside dial....sounds like a few of the teeth may be broken off, ...
Question about Whirlpool Dryers
dial does not turn to stop automatic turn whirlpool dryer on any setting it drys but the dial does not turn for the timer to stop when finish Hi, You will need to change the timer. The timer motor has
670 questions posted
Usually answered in minutes!
640 Questions
217 Questions
197 Questions
121 Questions
96 Questions