...cadence sensor now - will it work with new 500 I have a cadence sensor now and use the Forerunner 305. If I upgrade to the new Edge 500 will the cadence sensor still work - or do I have to buy a new ...
...cadence sensor. (GSC10) 2. Turned on my garmin 305 edge outside to acquire satellites (probably not nec but did it anyway) 3. Pressed reset on the GSC10, saw red/green flash (what order?) 4. Here's ...
cadence sensor they need to be paired. As they communicate wirelessly with each other the Edge needs to connect to each sensor before it can receive input from it. The initial pairing needs to be done
cadence sensor. Had one, thought the battery had died, changed that, this didn't work so I guessed the unit died and bought another one...same problem. Help! When changing battery, accessories need to
...cadence receiver to communicate with the GPS unit 1. move unit closer to cad sensor, if it works your battery in Cad is weak, change it with CR 2032 (3 volt). 2. are you pressing the reset button , ...
...wheel movement, so using any GPS on a trainer will show no movement and using it indoors will give you a bad signal. The sensor on the crank used on the Edge 705 is only for cadence and not
GPS elavation I have had a Edge 800 for months and has been working fine but today the GPS elavation shows as -95ft when it should be 333ft, I try and change it in the settings/system/GPS/elavation ...
...cadence sensor. I then asked them again: Before I do the 2nd step which resets the data, will it erase only the training data (tracks etc.), or also all the other user data like profile and such? If ...
...cadence is not coming up on the monitor. every thing else is working. Pushed the reset button on the sensor the speed light was fine the cadence light seem to be missing now and then,the magnet seems ...
55 questions posted
Usually answered in minutes!
1,343 Questions
1,187 Questions
1,096 Questions
889 Questions
690 Questions